NEWS

The installation guide for an electrostatic powder coating machine :

Installation Steps

Choose Installation Location

Ensure the area is well-ventilated, away from open flames and flammable materials.

The ground should be level and capable of supporting the machine's weight.

Prepare Tools and Materials

Common tools: wrenches, screwdrivers, level, etc.

Installation accessories: cables, air hoses, spray guns, etc.

Unbox and Inspect Equipment

Check if the equipment is complete and all accessories are included.

Confirm there is no damage; take photos if necessary.

Position the Equipment

Determine the placement based on the machine's dimensions and requirements.

Use a level to ensure the equipment is properly aligned.

Electrical Connections

Connect the power supply according to the wiring diagram provided by the manufacturer.

Ensure proper grounding to prevent static and electrical faults.

Air Source Connection

Connect to the air compressor, ensuring a dry air supply at the correct pressure (typically between 0.4-0.7 MPa).

Use appropriate hoses and fittings to prevent air leaks.

Powder Supply System

Install the powder supply box and feeding hoses, ensuring smooth powder flow.

Adjust the powder flow rate as needed.

Spray Gun Installation

Connect the spray gun to the feeding system and adjust its position and angle.

Ensure the nozzle is clean and free from blockages.

System Testing

Conduct a dry run of the system without spraying to check functionality.

Verify that electrical, air supply, and powder feeding systems are operating correctly.

Safety Check

Ensure all safety devices are in place, such as anti-static devices and emergency stop switches.

Keep the surrounding area free of flammable materials and maintain a safe distance.

Important Notes

Follow Manufacturer Instructions: Always refer to the installation manual provided by the equipment manufacturer.

Regular Maintenance: Periodically check the equipment to ensure all connections are secure and prevent wear and tear.

Train Operators: Ensure that operators receive proper training on equipment operation and safety precautions.